App

LUMIX Tether : Operation with macOS 10.15 Catalina

Bạn đang xem: LUMIX Tether : Operation with macOS 10.15 Catalina

LUMIX Tether : Operation with macOS 10.15 Catalina

Feb. 12. 2020

Performance test of LUMIX Tether with macOS 10.15 is underway.
Problems found so far are as follows.

<!–

*Click here to check the supported OS for LUMIX Tether Ver.1.6.

–>

[ macOS 10.15.3 ]

When activated LUMIX Tether after USB connection, below pop-up window(s) is displayed and LUMIX Tether does not start.

[Pop-up Window 1]
 
[Pop-up Window 2]
 

 How to restore

In case that popup window -1 appears on the display
1. Click [OK] to be closed for popup window.

In case that popup window -1 and -2 appear on the display
1. Click [OK] to be closed for popup window -1.
2. Click [Close] to be closed for popup window -2.
3. Display [Force Quit Application] screen by pressing [option] + [command] + [esc]
4. Select [LUMIX Tether]
5. Click [Force Quit] button
6. Activate LUMIX Tether software again.


[ macOS 10.15.2 ]

LUMIX Tether closes after below message is displayed when activated after USB connection.
“An internal error occurred during camera connection.”

 How to restore

We are researching the cause of this problem.
At the moment, there is no workaround to prevent this problem.

* We have verified that the LUMIX Tether being worked fine with macOS10.15.3.
Kindly recommend to be used for macOS10.15.3 whenever LUMIX Tether does not start.


[ macOS 10.15.1 ]

<!–

インストールに関する問題

–>

Below pop-up window is displayed while running the installer (LUMIXTether_v1_6.pkg) and cannot install the software.

  

 How to restore

1. Press [OK] and close the pop-up window above.

2. Go to [System Preferences]

3. Select [Security & Privacy]

4. Go to [General] and click [Open Anyway] displayed beside the message [“LUMIXTether_v1_6.pkg” was blocked from use because it is not from an identified developer.]

5. Click [Open] and the installer activates.

Unable to proceed from License page.

Unable to proceed when pressed [Continue] in the License page.

 How to restore

1. Press [Go Back] and go back one page.

2. Installer reverts to normal condition. Continue installation.

<!–

使用時の問題

–>

When LUMIX Tether is activated, it closes after start-up screen is displayed.

 How to restore

1.Connect LUMIX Tether compatible camera to a Mac computer via USB and activate the LUMIX Tether.

There may be times where LUMIX Tether cannot be closed.

 How to restore

1. Display [Force Quit Application] screen by pressing [option] + [command] + [esc]

2. Select [LUMIX Tether]

3. Click [Force Quit] button


<Others>

Software Version Related (LUMIX Tether Ver.1.6 and before)

When activated the LUMIX Tether, a program update information screen is displayed but cannot select neither [Yes] nor [No].

 How to restore

1. Connect LUMIX Tether compatible camera to a Mac computer via USB and activate the LUMIX Tether.

2. Select [No] ([LUMIX Tether] does not function correctly when [Yes] is selected.)

*See

here

to download the latest version of [LUMIX Tether].

Chuyên mục: App

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button
444 live app 444 live 444 live app 444live kisslive kiss live yy live yylive